skip to main content

Where did you get the tiles?

6 years ago

What tiles are they, where did you get them? Thanks!!

East Dulwich Residence_Project 073 · More Info

Comment (1)

PRO
Morgan Harris Architects Ltd
6 years ago
Hi Bill, these are basalt tiles, we specified them for the project and sourced them directly from the supplier. This was almost ten years ago now so I am afraid I don't have the information directly to hand. Good luck with your project, I am sure that you or your architect/designer can find something similar by searching using 'basalt strips' as your search input. Slate strips from Mandarin Stone could be considered as an alternative; though do your research regarding substrate, adhesive, grout etc.
Related Discussions
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More
Need help to determine where to place my inbuilt oven
Q
Comments (14)
Hi Fred, Thanks for the want of the precise measurements. The U shape area in my kitchen is 64" - 104 - 99" (left - centre - right). Height of the kitchen area is 107". The wall with the fridge has total length of 99" Fridge is 32" wide, 29" deep, 73" high (I bought this fridge on a good bargain but realized it was slightly oversized in this kitchen area, but got to live with it now) The wall beside the fridge is 23" deep I know some gap has to be left between this wall, the fridge and the wall mounted/countertop cabinets for ventilation I guess. So I'd say the cabinets on this wall will have a length of only 63"/64"? The microwave is 18.5 wide, 13" deep, 10.5" high The oven is 24" wide, 24" deep, 24" high. The wall next to the fridge which will have this feature cabinet 42" wide, 110" high which is next to the main door. I'm thinking the feature wall is kind of plain, but it covers up where the fridge is sticking out.
...See More
Cement 'growing' in bathroom floor, help!
Q
Comments (7)
It looks as if you have something crumbling behind the tiles. It could be the porcelain or the wall. This once happened to me. I paid for a professional to insert a gas fire into the fire breast. Consistently we had what looked like rubble falling down the chimney. No one knew what it was and we were baffled. Then one day we had the chimney swept by an amazing chimney sweep who informed us the wall prep behind the fireplace hadn't been done properly and what was falling down was the brick and rubble which was behind and had not been cleared properly. He said it wasn't a big deal and not dangerous so we left it, although it was an inconvenience having to clean it up every day particularly in bad weather. I would advise asking a tiler to come and have a look. Maybe your bathroom tiles need sealing, maybe water is getting in. If the tiler doesn't know ask a surveyor, he may not have the answer but he will know which trade to point you in the direction of. It could simply be a case of the walls not being prepped properly before the tiles were put up. Any which way, if a large tile which could potentially fall off a wall it needs to be checked because if it landed on you it could do serious damage or cause further tile damage which would make the job of rectifying more expensive.
...See More
How can I hide an existing column in the kitchen
Q
Comments (5)
You could use the column for something useful like hanging utensils or cooking tools if you have the height or a towel rack or if you want to just hide it you could put fairy lights on/around it to give a homely feel.my personal opinion would be if there is a ledge you should get some vintage alcohol bottles and put them there as decoration and it works nice in most households.if no ledge just get a wine rack and screw it to the column
...See More

Sign Up to Comment

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.