skip to main content

Best material for decking

8 years ago

We are renewing our deck and not sure whether to use timber or plastic

Featured Answer

jmm1837

8 years ago

Our last house was in a fire-risk area. We wanted a wood deck and were told, forget it, it would never be approved. The idea of a tile or iron grid deck didn't appeal much. Then our builder told us that the council had already approved merbau decking on someone else's house. We were good to go. It's a very hard wood, fire resistant (certainly not fire proof) and does the job. Just try to make sure it's got a sustainable tag with it.

The other alternative is some of the eco product, which looks pretty good, doesn't need maintenance, and is partly (as I understand it) recycled timber and milk bottles.

I prefer real wood, but that's a personal choice.

Sort by:Oldest

Comments (9)

User
8 years ago
Are you surrounded by fields or trees in the country, then use a fire resistant product.

If you are ageing, or disabled, use a manufactured material.

If neither of these, use what appeals to you, but timber should be certified sustainable.
Susan Dickens thanked User
Related Discussions
What is your favourite part of your home?
Q
Comments (7)
It's a draw between my living room and bedroom- I've styled both so that they are comfy relaxing spaces- I can't choose, I just know that I love being at home :-)
...See More
Reclaimed wood
Q
Comments (3)
Hi EJ, I'm not going to be of much help, but I believe the obvious sources of reclaimed wood would be demolition and removal specialists in Singapore? At least that's how I know how antique dealers source vintage tiles in Singapore. Chatting with reclaimed wood furniture specialists like Journey East (https://www.houzz.com.sg/pro/journeyeast) might help too. And its true shipping costs from overseas would be prohibitive. Malaysia has always been this country's hinterland for raw material, and Indonesia has also played the part of being a significant sourcing ground for furniture makers in the region. You might want to (or have already) make sourcing trips to Central Java or Bali where costs might even be significantly lower than finding these pieces in Singapore.
...See More
HOW TO CHOOSE THE RIGHT COUNTERTOP THICKNESS FOR YOUR HOME.
Q
Comments (1)
I forgot that curved countertops are a possibility within the kitchen. Makes it look classy.
...See More
HOW TO CARE FOR AND MAINTAIN YOUR NATURAL STONE GRANITE COUNTERTOPS.
Q
Comments (0)
One of the biggest fears people may have about natural stone is the maintenance it requires. With many individuals increasingly turning to the use of natural materials in the home, granite has become the countertop of choice. Synthetic solid surface materials are no match for the richness, depth, and incredible performance of real granite. Unlike laminates and solid-surface materials, a hot pot or frying pan has no effect on granite’s mirror-like finish. Most importantly, by choosing a granite countertop you not only give your kitchen everlasting performance and beauty, but you also increase the value of your home. Granite is also a very hard mineral and is virtually impervious to abrasions, impact damage and heat. However, the material is prone to cracking due to mechanical stresses caused by repeated heating and cooling. While the seams in between slabs provide some leeway for this repeated expansion and contraction, it is best to keep granite away from sources of large heat fluctuations. You’ll find caring for your natural stone is easy. The best care you can give your natural stone is preventive care. By following a few suggestions, your countertops will last a lifetime while maintaining a brand-new appearance. BASIC CLEANING AND MAINTENANCE 1. AVOID USING CLEANING PRODUCTS WITH ANY KIND OF ACID OR ABRASIVE. Avoid using harsh cleaning agents that contain strong acids/alkaline (e.g. bleach, glass cleaners, ammonia, degreasers) or abrasives (e.g. powdered ceramic/bathroom cleaners) as it can cause the sealant to discolour and scratch. Warm water, mild dishwashing liquid, and soft clean cloth are generally all that’s needed to maintain your granite countertop surface. 2. AVOID SUBJECTING YOUR GRANITE COUNTERTOP TO HEAVY WEIGHTS AND PRESSURE. While hard, granite surfaces are brittle and you should not stand, kneel on, sit or stack heavy objects onto your countertops as they could crack or break. This doesn’t mean that granite is fragile, however, and it’s perfectly capable of supporting microwaves, dish holders and other moderately heavy objects. 3. DO NOT PLACE HOT PANS OR OTHER OBJECTS DIRECTLY ON YOUR COUNTERTOPS. Again, hot objects can cause the sealant to discolour (mainly in dark granites) and/or cracking. Always use a protective barrier between any hot object and granite such as trivet or mat. Unsealed granite countertops do not have this problem, but are highly porous and come with other problems. 4. WIPE OFF SPILLS AS QUICKLY AS POSSIBLE. Sealed granite countertops are surprisingly resilient to stains from citric acid, coffee tea, alcohol, or wine. However, as a preventive measure, wipe up any spills on the countertops within a reasonable amount of time and do not let liquid sit on the countertop overnight. 5. Watch out for oil stains. Granite is most prone to staining by oil – be careful not to place any pots or frying pans with oil traces on the bottom on the countertop surface. Blot oil and acid spills as soon as they happen, and clean with mild soap and warm water to avoid any harm to your countertops. If the oil stains remain, there is a special cleaning procedure for the removal of deep-seated, time-set dirt and grime. A general poultice with baby or baking soda and water is the best remedy. First, moisten the surface of the granite with the same liquid that made the paste. Next, apply the poultice paste to the granite surface about half an inch thick. Tape plastic sheeting over the poultice area, and allow it to sit for 48 hours. Remove the poultice with a spatula, rinse the cleansed area with clean water, wipe off excess water, and allow the surface to dry. 6. RINSE SOAP AND WASHING DETERGENTS OFF TO PREVENT LIME BUILD UP. Rinse with hot clean water on a regular basis and use a paper towel to dry. Another way to remove lime build up , soap scum, stains or dried spills, is to use a straight razor blade in a gentle scraping motion. Do not use lime removal products or cleaning products that contain ammonia, as this will affect the seal on the stone. 7. AVOID HITTING THE SURFACE WITH HARD OBJECTS. Chips in granite are not a common occurrence. When they do happen, chips are most often caused by banging something into the edge of the countertop. Take care when you handle heavy pots and pans around your granite profiles as these are the most prone to cause chipping. If a chip does occur and you find the piece that chipped out, hold on to it. Most of the time it can be epoxied back into place. 8. APPLY SEALERS. The use of sealers is an excellent preventive measure and will encourage the preservation of your granite countertops. Some granite can be very porous. Sealers fill in natural pores and repel spills on the surface, radically reducing the rate of absorption. This gives you time to wipe spills away before they have a chance to penetrate your stone. After the installation process, the granite must be sealed. We recommend a re-application of this sealer annually, or more often for some light granites, to fully maintain the luminosity and avoid stains. Some dark-colored, dense granites (browns, blacks) do not require sealing. When the water or liquid spilled on your countertop fails to bead up when splashed, or you begin to notice a water darkening spot that dries out, this is an indication that your countertop needs to be re-sealed. 9. AVOID STORING CHEMICALS ON THE SURFACE. It’s risky to store chemicals on the surface of your granite countertop in case of spillage. This includes cooking oil, hair products, chemical cleaners and cosmetics.
...See More
PRO
MB Design & Drafting
8 years ago
Timber such as a Australian hardwood would be a preferred choice.

Merbau leaches a lot of tannins so can stain brickwork, concrete or paving if the deck is elevated above these surfaces. Being imported it requires transport, limited local jobs and some may not be sustainable managed. The colour of Merbau is however fantastic. It is also very hard and relatively fire retardant (as is spotted gum, tallowwood, etc..)

Tallowwood, spotted gum, etc. is a great choice. It supports local jobs, limited transport, sustainable managed, etc, etc..

Yes they need oiling but is that really a big problem as any house needs maintenance. Oiling a deck is easy and a hell of a lot easier than most other jobs around the house. More satisfying too..... Can always pay a painter to pressure clean and re-oil.

The composite boards are somewhat ok but have inherent problems as well. Some once scratched can't be fixed so the scratch is there for ever. Some need painting or staining the same as timber so no gain there apart from some being non combustable. All products need at least some sort of maintenance even just a scrub.
Susan Dickens thanked MB Design & Drafting
suzineedsahouse
8 years ago
I have just seen a huge "timber look" deck go down (probably 15m x 10m). It looks like the real thing, it can be washed down and it won't rot in wet or dry conditions (take your pick depending on your location). The guy laying it said it was a bit more fiddly to put down then timber (the screw holes are hidden or something...they don't drill straight through like timber). For the commercial application I saw it in, it was ideal. I don't know if it would be hot underfoot during the day, but in the evenings it will be fine.
Susan Dickens thanked suzineedsahouse
User
8 years ago
last modified: 8 years ago
Modwood is Aussie made

http://www.modwood.com.au
Susan Dickens thanked User
PRO
Concept Products
7 years ago
if you want the most realistic looking man made decking option take a look at the Millboard decking. This has no timber fibre in it, will not rot, fade, splinter, expand and contract. All is needed is a hose down to remove any general dirt on the surface. Depending on what look you are after choose from either the Weathered range (3 colours) or the Enhanced grain range (6 colours).

www.millboarddeck.com.au

Millboard Smoked Oak decking · More Info

Millboard Weathered Vintage Oak decking · More Info
Kira Parkes
7 years ago
Most recommended construction deck materials are 1) pressure-treated lumber (a classic hardwood look is a plus but this type of wood requires a lot of maintenance and can warp easily), 2) redwood (durable but more expensive), 3) composite (low maintenance but you’re limited as far as color options go) and 4) aluminum (most durable but also most costly). Read more
wuff
7 years ago
We have had Mill board down three years, love it for look and maintenance (there isn't any), hose or sweep. Only con is hot underfoot if exposed to sun, ours all under cover so no issue
PRO
Castlegate Home Improvements
7 years ago
Timber or composite decking also depends on what area you live in, regards the climate and where your deck will be.

Merbau hardwood is an Indonesian timber that fares very well in Western Australia as the climate is hot and dry which tends to suit the Merbau. It can leech tannins, especially if wet, if not oiled straight after installation when these tannins are locked in.

We laid a Spotted Gum deck for clients in Perth a year ago that needs constant oiling, every two months, to withstand the severity of the sun. Spotted Gum looks lovely but being in Perth, it is better to be covered. However Merbau hardwood decks are more stable, durable and don't tend to twist or shrink as other timbers such as Jarrah, Batu, Spotted Gum and pine may do. Merbau is a hardwood we recommend to clients in they are unsure what timber to go for.

A timber deck fully exposed or beside a swimming pool will need more oil applications than one under a veranda or patio.

NexGen composite is a beautiful board manufactured in the USA that comes in various colours and is secret clipped. This is maintenance free other than a wash down with warm soapy water every now and again. Trex is also an American board that is highly recommended.

Millboard is a very good choice also and has a more of a natural look. This board is a bit more expensive than NexGen and Trex and looks great.

Cons for composite is that it does get hot if exposed to the sun however, timber will get hot too. From experience, its also better to lay your composite decking when the boards are cool, not too hot as they expand and contract length wise.

Composite is also scratch resistant but isn't scratch proof.

Things to consider before having your deck installed are

1) how much maintenance am I prepared to do to upkeep my deck?

2) Is my deck in a termite or fire prone area?

3) Do I need a council permit? (if it is 500 mm off the ground in which case you'll need balustrading)

4) What look am I going for? (Modern, natural, rustic or contemporary)

5) How much money am I willing to invest?

6) What material do I like better?

Whatever material you decide on, enjoy your deck. It will be a good investment for you and your family, and your property.

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.