manny_hothi

Rear Extension - wall thickness

Manny Hothi
6 years ago

We're planning a rear extension to our 2 bed victorian terraced house. The problem is the width of our house - it's quite narrow. I am trying to work out the likely internal space to see whether our ideas are viable.
Does anyone have any ideas of we might keep the thickness of external walls to a minimum? it seems as though standard cavity walls come in at around 300mm. We need them to be thinner. Are timber framed/brick skin walls viable? How thick are these walls likely to be?
Any help would be appreciated!

Comments (2)

  • Kerry Donnelly
    6 years ago
    Brick/ block- facing brick 102.5, cavity 50, insulation 50, block 100, plaster dabs 12.5, plasterboard 12.5...

    Timber kit- facing brick 102.5, cavity 50, OSB 9, timber kit 89/140 ( as per engineer) plasterboard 12.5(if you run the insulation/ services between the timber kit, not allowing for service void)..

    I only know the Scottish regs( not sure if it's the same in England) , you may need additional plasterboard as per fire regs. But your architect/ technologist will be able to give you a better idea, as will building control/ engineer.
  • PRO
    White Red Architects
    6 years ago

    Hi Manny,

    The layout and connection between old and new will also be key. Making the right decisions here can stop the space feeling long and thin. On the project below we worked with a long thin flat to keep light and space maximised.


    Hackney Extension · More Info

    Happy to discuss further if helpful

    Joe

    07817798459

Singapore
Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.