Drawer Pull Sizing

welykoridko

4 years ago

What is the size of the drawer pull versus the width of the drawer/recess? Thanks1

Bell Kitchen · More Info

Sort by:Oldest

Comment (1)

PRO
Laurysen Kitchens Ltd.
4 years ago
Hi! Thank you for the question. These are a typical 96mm (screw center to center) handle but they are roughly 6" wide and the drawer recess would be the width of the drawer, 18", less the rail width of 2-1/4" on either side, so roughly 13-1/2".
Related Discussions
Reno - what are the steps?
Q
Comments (6)
First thing you need to understand is the scope of the project and what your abilities and experience will cover. Do you have any experience managing a construction project? Have you ever scheduled a construction project? Have you drawn up a trades (i.e. framing, plumbing, electrical, mechanical, etc., etc..) contract? Have you ever dealt with the permitting office in pulling permits? Have you ever inspected any construction for quality and compliance to the design documents? Have you ever dealt with inspections or construction deficiencies and had to resolve them with the sub-contractors? If you can't answer yes to all these questions, then you're venturing into a field you know little or nothing about. Any mistakes or stumbles you make in your learning curve are most likely going to be costly in both time and your budget. There are some projects that are DIY level.......there are some that would best be left to those of us already having the background and experience. Let me give you an example. I have an oak tree beside the house I'm renovating. It sits about 12' from the end of the house and has at least a 30' radius drip line which means it extends out over the roof of the house. Having spent a number of years of my young life on a ranch and farm, I know how to drop trees. I know how to operate a chain saw safely without loosing a limb or making a quick trip to the ER. From years in the construction / design field, I know how to operate a high lift ......... but even I know that the task of removing this tree is beyond my level in spite of my willingness and wish to save the $3500 I've been quoted. There are some things best left to the pros. Besides, If I drop a 14" diameter limb on the roof, I would never hear the end of it from my wife. Based solely on the questions you asked, I would highly recommend that you hire an Architect to help you with the design and your budget. Then I would find a well recommended GC to do the job......I'm betting you'll make the most of your limited budget going this route.
...See More
Where do you store medicine?
Q
Comments (7)
I usually store it in the kitchen. I tend to imagine the germs the goes around the bathroom and I wouldn't want germs on any medications/first aid etc to be around that. Also, the bathroom has too much moisture to be keeping medications.
...See More
Prep only kitchen island dimensions
Q
Comments (7)
I was hoping to have an island, but as I stand in the old kitchen and measure and open oven doors...it feels like it might get in the way. I'll be pushed up against the island when I open up the oven door! I do a lot of cooking. I have 3 ft on one side of the oven and 2 feet between the oven and the prep sink. If I remove the island, there is 8' between the sink/fridge wall and the oven. Perhaps a portable prep station that I can put in front of the pantry wall? Style is farmhouse/country...could custom build a little prep island on casters.
...See More
My Kitchen Renovation
Q
Comments (0)
I started with a design dilemma, and got some good advice from some very kind people on Houzz. The transformation took more time to figure out then it did to complete the construction. My advice to anyone wanting a new space is to do your research, without rushing into decisions, which can be difficult when working with some, because of the 'sale deadline'! Guess what? There will always be another sale! In fact, by taking my time I ended up being able to keep all of the organization options I wanted and ended up with such a great sale that I was able to upgrade to custom solid wood cabinets and drawers for the same price as my original stock cabinets with MDF panels. By customizing the sizes of cabinets, I was able to create more space to open up the small kitchen for a spacious feel. My contractor helped me achieve the built in pantry wall which puts all of my spices, canned goods, etc., right in front of me to see exactly what I have or need to replenish. But, my favorite part of this kitchen is what the contractor did with my narrow and deep closet. It was widened and turned into a dry bar with microwave and roll out storage. Having a place for my coffee maker and microwave was key, so I could keep the new expanse of counter space visible! Removing the 'bump up' wall of my original counter offered a more open concept feel, which was a great improvement. Some before and after photos can be found on the design dilemma thread: https://www.houzz.com.sg/discussions/small-entry-to-kitchen-fridge-or-something-different-dsvw-vd~5210318 Thanks to all for the Houzz advice and happy renovations!
...See More

Drawer Pull Sizing

Comment (1)

Laurysen Kitchens Ltd.

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US