skip to main content

what type of wood is the bathroom vanity?

3 years ago

Is it curly maple?

Whole House / Multi-Room Remodel · More Info

Sort by:Oldest

Comments (2)

PRO
Penn Contractors Inc
3 years ago
yes it is curly maple
trudywallace
Original Author
3 years ago
Thanks! It’s beautiful!
Related Discussions
Ambient lighting : options and guidelines
Q
Comments (4)
You mean general lighting? Ambient light is whatever lighting happens to be spilling into the space. Could even be from outdoors or another room. Lighting is generally divided into general, task and accent lighting. General usually being overhead and providing a base level of illumination. Task being things like lamps, vanity lights or pendants-anything helping u see better. And accent being anything used to accent or emphasize something. Sometimes the categories run together like under cabinet lights which are both task and accent. So in order to figure out what the right fixture or lamp is you have to determine is it for general, accent or task purposes. Fluorescent tubes make great general light in an office or workspace but poor task or accent light in a family room. Similarly lots of recessed lights work well in kitchens but are usually too much in bedrooms where you typically don't need much general lighting. A good vanity fixture might fulfill all three in a powder room but in a master bathroom you might need some recessed cans to provide task lighting over the shower or tub. A lamp might be enough in a bedroom but not enough for a heavy task area like a laundry room. You get the idea. It's less about the fixture and more about how it's being used.
...See More
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More
solid wood vanity for bathroom?
Q
Comments (1)
Hi Gerard, Love your idea of a floating wood vanity with wash basin on top. I am assuming that you love the Bali look? I would stay away from plywood and any laminates here as water will eventually destroy the wood and decay would set in. I would rather look for a solid treated teak wood as most teak woods are much hardier and able to withstand some dampness and not rot easily. Do bear in mind that although it may be low maintenance, that does not mean that there will be no maintenance. Hope that helps? Do post a pic when you finally finish with your project.
...See More
Wood tiled floor or marble tiled floor for my bathroom?
Q
Comments (9)
Wood and Marble are both non-porous thus it would cause etching and corrosion. Besides that, marble are high maintenance materials as they require high maintenance. In the long run, wooden looking tiles (made of porcelain or ceramic) would be more practical. You can also consider marble looking quartz. You may check out the D & L series of iQuartz range. If you're based in Singapore you may call Stone Amperor in +65 87879029 for more information. If you're based in Malaysia you may contact AmpQuartz in +6017-7320149 for more information.
...See More

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.