skip to main content

Wet Room Floor Heat?

11 years ago

I have watched the mosture membrane install vidio for a wet room. Where would you install a cable heat system, under the membrane or over.

From Mid Century to Contemporary Master Bathroom · More Info

Sort by:Oldest

Comments (4)

dwither
11 years ago
It goes under the membrane
Shaily Vyas
11 years ago
WHAT IS IN THE FLOOR OF WET ROOM
Related Discussions
Reno - what are the steps?
Q
Comments (6)
First thing you need to understand is the scope of the project and what your abilities and experience will cover. Do you have any experience managing a construction project? Have you ever scheduled a construction project? Have you drawn up a trades (i.e. framing, plumbing, electrical, mechanical, etc., etc..) contract? Have you ever dealt with the permitting office in pulling permits? Have you ever inspected any construction for quality and compliance to the design documents? Have you ever dealt with inspections or construction deficiencies and had to resolve them with the sub-contractors? If you can't answer yes to all these questions, then you're venturing into a field you know little or nothing about. Any mistakes or stumbles you make in your learning curve are most likely going to be costly in both time and your budget. There are some projects that are DIY level.......there are some that would best be left to those of us already having the background and experience. Let me give you an example. I have an oak tree beside the house I'm renovating. It sits about 12' from the end of the house and has at least a 30' radius drip line which means it extends out over the roof of the house. Having spent a number of years of my young life on a ranch and farm, I know how to drop trees. I know how to operate a chain saw safely without loosing a limb or making a quick trip to the ER. From years in the construction / design field, I know how to operate a high lift ......... but even I know that the task of removing this tree is beyond my level in spite of my willingness and wish to save the $3500 I've been quoted. There are some things best left to the pros. Besides, If I drop a 14" diameter limb on the roof, I would never hear the end of it from my wife. Based solely on the questions you asked, I would highly recommend that you hire an Architect to help you with the design and your budget. Then I would find a well recommended GC to do the job......I'm betting you'll make the most of your limited budget going this route.
...See More
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More
Glass walls for Double Volume loft
Q
Comments (1)
Cool space. Many in US are closing in the upper volumes and creating media or game rooms so they can justify the heat and air bills with usable space. A less expensive alternative may be high tech UV window films or shades.
...See More
Need help to determine where to place my inbuilt oven
Q
Comments (14)
Hi Fred, Thanks for the want of the precise measurements. The U shape area in my kitchen is 64" - 104 - 99" (left - centre - right). Height of the kitchen area is 107". The wall with the fridge has total length of 99" Fridge is 32" wide, 29" deep, 73" high (I bought this fridge on a good bargain but realized it was slightly oversized in this kitchen area, but got to live with it now) The wall beside the fridge is 23" deep I know some gap has to be left between this wall, the fridge and the wall mounted/countertop cabinets for ventilation I guess. So I'd say the cabinets on this wall will have a length of only 63"/64"? The microwave is 18.5 wide, 13" deep, 10.5" high The oven is 24" wide, 24" deep, 24" high. The wall next to the fridge which will have this feature cabinet 42" wide, 110" high which is next to the main door. I'm thinking the feature wall is kind of plain, but it covers up where the fridge is sticking out.
...See More
PRO
Serenity Bathrooms
9 years ago
When installing your wet room system, you should always apply the Tanking system as per the manufacturers specifications and method, if you are intending installing electric underfloor heating, this should be installed on top of the membrane, I prefer to use Warmup pro-wire system, the cable is loose, which allows you to cover the floor area more evenly than when using a mat, the mats are fine for larger rooms, but generally bathrooms are smaller and have restrictions to where you can run a mat, also the Pro-wire has a very small profile and you can tile directly on top of it, remember to use a plastic notched trowel though to prevent damaging the wire.
PRO
ID by Gwen
7 years ago
Thank you for your replies!

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.