skip to main content

Where did you get these travertine pavers???? Thanks

9 years ago

In-ground pools · More Info

Sort by:Oldest

Comment (1)

PRO
Pool Pros, Inc.
9 years ago
Hey there! We purchase them from local wholesalers here in Southwest Florida. Are you interested in getting some installed around your pool & patio?
Related Discussions
Ideas on updating/replacing the veneer trim under kitchen cabinets
Q
Comments (12)
I would seriously consider replacing the cabinets before putting a new granite countertop on them. The problem is that no one will remove the countertop at a later date if you want to change the cabinets, due to the possibility of breakage. The only choice you will have then is a reface. Adding new doors, drawer fronts, and veneered sides is just a facelift. You could also add new hardwood drawers with undermount cushion close slides, but by the time you do this if will be the same cost as new cabinets now. The cabinets you have now, frameless, particle board sides are notorious for having the hinge screws strip out the particle board they are attached to. Since you can't put a longer screw in them, because the material is only 3/4" of an inch thick you have a problem. You also can't put a wider screw in them because it won't fit through the pre-drilled holes in the hinges.
...See More
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More
Tiny Apartment
Q
Comments (9)
Hi Amuro Elaine, Are you working with an interior designer to renovate your home? You'll probably be asked a few questions such as: How many people will live here? Is the bedroom wall a structural, load-bearing wall? Do you intend to entertain? But what an interesting space you have, and especially if you are living alone, there's so much potential to transforming it into your own pretty pad! If I were you, I would swap the living space with the bedroom, that means hacking the bedroom wall open, and then erecting a wall from that point where your kitchen wall ends. Have the wall in glass, with sliding glass doors, so that you can open it up when you have guests over. And when you're alone, you'll be able to enjoy the entire length of the apartment from your bed. Here's a photo of the wall idea:Keep us posted on the progress of your renovation, please :)
...See More
Reclaimed wood
Q
Comments (3)
Hi EJ, I'm not going to be of much help, but I believe the obvious sources of reclaimed wood would be demolition and removal specialists in Singapore? At least that's how I know how antique dealers source vintage tiles in Singapore. Chatting with reclaimed wood furniture specialists like Journey East (https://www.houzz.com.sg/pro/journeyeast) might help too. And its true shipping costs from overseas would be prohibitive. Malaysia has always been this country's hinterland for raw material, and Indonesia has also played the part of being a significant sourcing ground for furniture makers in the region. You might want to (or have already) make sourcing trips to Central Java or Bali where costs might even be significantly lower than finding these pieces in Singapore.
...See More

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.