skip to main content

Type of wood and stain color please

last year

Can you please share the type of wood and stain used ?

Project of the Month: March 2019 · More Info

Sort by:Oldest

Comment (1)

PRO
TCP Custom Outdoor Living
last year
The ceiling is English Porter pre-stained tongue and groove by Woodtone. The columns and beams are cedar that were stained to complement the ceiling.

Hope that helps.
Related Discussions
White indoor shutters with dark brown window frames
Q
Comments (8)
One more question: If I use white shutters, does that mean I have to also have white doors inside the house? Should the internal doors match the window frames or the shutters? There will be a slide and fold door between the living room and an ante-room, which will be of glass with upvc frames; my furniture in my living room have dark brown cane frames, and I have a black antique Chinese lacquer screen, on which are various colours of jade pieces, and a large opium bed of dark mahogany, and also a black grand piano, and the floor is a honey brown Thai Teak on which would go a couple of Persian rugs.
...See More
HELP: Small L-shaped kitchen with refuse chute on wall!
Q
Comments (10)
Are you saying that cooking next to the chute would gross you out even if its covered? Andd to use it for its intended purpose? In the first picture, it looks like the stove is directly underneath the chute, but I can see in other pics that it is not. I think it is far enough away. If everything is bagged properly, it shouldn't be that bad. You will have to check on local code regarding having the stove next to the window. Code may make your decision for you. People usually just put shorter cabinets above that type of range hood. I would recommend doing so because you need all the storage you can get. The hood--being different from the bank of cabinets--will provide relief to the eye. With cabinets above, it'll still feel balanced. And, as for covering the chute, do you want to cover it and restrict access or do you still need to use it for its intended purpose and just want to camouflage it? To help the room feel pleasant, cheery, and light, I recommend using a glass tile. Even though it's applied to a wall, the translucency still shows and evokes a sense of the adjectives above. I think it would help keep things light. Consider a slightly higher toe-kick underneath the lower cabinets. It helps to create a lighter-footed feeling. You could also consider cabinets that have furniture style feet. for a more open feeling. Your kitchen seems like an ideal room to use modern, lacquered cabinets. I don't know if you like the super-modern look, but I think it could be nice. Maybe just for the uppers. Use a medium-to-light toned wood on the bottom. A limestone floor might be nice. Or you can do wood or laminate. You could go with dark or light. I think it's mostly about preference.
...See More
Bathroom Marble Walls & Floors
Q
Comments (4)
Marble are both non-porous thus it would cause etching and corrosion. Besides that, marble are high maintenance materials. Marble requires proper care and maintenance. Acid should never be used on marble as it shall loose its shine. Marble should be regularly polished over a period of time to give it a new look. If proper precautions are not taken the marble becomes yellowish in colour. Italian marble is usually very soft and prone to cracks. Proper resins have to be used to make the surface strong and solid and avoid further cracks. Proper sealants should be used in marble flooring as the marble is highly porous and prone to staining. It absorbs stains very quickly especially kitchen stains hence are not appropriate for kitchen counter tops. In the long run, wooden looking tiles (made of porcelain or ceramic) would be more practical. You can also consider marble looking quartz. You may check out the D & L series of iQuartz range. If you're based in Singapore you may call Stone Amperor in +65 87879029 for more information. If you're based in Malaysia you may contact AmpQuartz in +6017-7320149 for more information.
...See More
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.