skip to main content

What type of hinge did you put on the lattice door?

10 years ago

Capitol Hill Project · More Info

Sort by:Oldest

Comment (1)

PRO
Molly Scott Exteriors, LLC
10 years ago
last modified: 10 years ago
The lattice door under the steps has an regular hinge from a hardware store. I wanted to make sure it was set to swing open as close to 180 degrees as possible, but other than that its a regular hinge.
pudlma thanked Molly Scott Exteriors, LLC
Related Discussions
Ideas on updating/replacing the veneer trim under kitchen cabinets
Q
Comments (12)
I would seriously consider replacing the cabinets before putting a new granite countertop on them. The problem is that no one will remove the countertop at a later date if you want to change the cabinets, due to the possibility of breakage. The only choice you will have then is a reface. Adding new doors, drawer fronts, and veneered sides is just a facelift. You could also add new hardwood drawers with undermount cushion close slides, but by the time you do this if will be the same cost as new cabinets now. The cabinets you have now, frameless, particle board sides are notorious for having the hinge screws strip out the particle board they are attached to. Since you can't put a longer screw in them, because the material is only 3/4" of an inch thick you have a problem. You also can't put a wider screw in them because it won't fit through the pre-drilled holes in the hinges.
...See More
Need help with covering windows on French doors that are very close to
Q
Comments (11)
I have to say that well made Roman Shades are not cheap, they are the higher end of the market. Secondly the thing to consider is that they are an all or nothing product, they are either open or closed. What part of the country do you live in? What direction do the windows face, and how often are those doors used? Drapery that can not be moved completely out of the way will get caught in the doors all the time, so while I hate taking out a window for any reason, removing it might make sense as it seems rather redundant. Don't do any type of venetian if this door is used a lot, and if you do, make sure you do an outside mount, allowing for the stack to go above the frame of the doors when they are open. I suggest that you look into Hunter Douglas Polysatin Shutters, they are great on french doors, and the Hunter Douglas Duette Architella Vertiglide is perfect on doors, they also come as a duo light, meaning you can put two blinds into one product - so a sheer and an opaque or semi-opaque product. Just some thoughts to consider.
...See More
The HouzzAU Queenslander club
Q
Comments (2)
I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective.
...See More
Hairline cracks on cabinets
Q
Comments (3)
Wood moves with the temperature - hot/cold etc. Having said that unless you have placed your cabinets right next to a very hot radiator, or in direct sunlight, this should not happen. It also depends on the type of paint they have used - does it stretch with the wood? Any good cabinet maker would know this - I also note that these have been sprayed, and that may be the answer - sprayed paint will not move, whereas painted furniture does give. Do not think I would accept these, and stern words are needed with the supplier and put the ball back in their court. You should have at least one years guarantee with these, so I would ask another supplier what they think.
...See More

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.