Please help me save my hallway tiles!
Roo
6 years ago
Hello,
This weekend I discovered a gem underneath laminate flooring in our hallway. We are currently undergoing a major renovation and the builder has told me there will be a 3cm difference in height between the hallway and the new open plan flooring. I do not want to lose this piece of history, so how do I find a happy compromise without having a step? Use a thick rug? Door leading to that area will also be problematic. The part nearest the build has been damaged and I have to prove today that it runs to the front door to see if it’s worth keeping. I just want to restore it, no matter what, but can I do about the step?
Thank you.
PS I can add more photos or plans if needed.
This weekend I discovered a gem underneath laminate flooring in our hallway. We are currently undergoing a major renovation and the builder has told me there will be a 3cm difference in height between the hallway and the new open plan flooring. I do not want to lose this piece of history, so how do I find a happy compromise without having a step? Use a thick rug? Door leading to that area will also be problematic. The part nearest the build has been damaged and I have to prove today that it runs to the front door to see if it’s worth keeping. I just want to restore it, no matter what, but can I do about the step?
Thank you.
PS I can add more photos or plans if needed.
Featured Answer
Sort by:Oldest
Comments (6)
Roo
6 years agoOk, so I've tried to delete this post as I've just picked up the rest of the laminate and think that the flooring will need to be replaced. The floor level isn't the only issue. Previous owners have welded other tiles to the original ones (which is where the black glue is coming from). Also, we are soon to be running a new mains water pipe through the house and the flooring will need to come up in the hall. We are having a new boiler and pipe replaced because it currently takes 15 minutes to run a bath. I will be contacting a restoration company today to see if they can advise.
Related Discussions
HELP: Small L-shaped kitchen with refuse chute on wall!
Comments (10)Are you saying that cooking next to the chute would gross you out even if its covered? Andd to use it for its intended purpose? In the first picture, it looks like the stove is directly underneath the chute, but I can see in other pics that it is not. I think it is far enough away. If everything is bagged properly, it shouldn't be that bad. You will have to check on local code regarding having the stove next to the window. Code may make your decision for you. People usually just put shorter cabinets above that type of range hood. I would recommend doing so because you need all the storage you can get. The hood--being different from the bank of cabinets--will provide relief to the eye. With cabinets above, it'll still feel balanced. And, as for covering the chute, do you want to cover it and restrict access or do you still need to use it for its intended purpose and just want to camouflage it? To help the room feel pleasant, cheery, and light, I recommend using a glass tile. Even though it's applied to a wall, the translucency still shows and evokes a sense of the adjectives above. I think it would help keep things light. Consider a slightly higher toe-kick underneath the lower cabinets. It helps to create a lighter-footed feeling. You could also consider cabinets that have furniture style feet. for a more open feeling. Your kitchen seems like an ideal room to use modern, lacquered cabinets. I don't know if you like the super-modern look, but I think it could be nice. Maybe just for the uppers. Use a medium-to-light toned wood on the bottom. A limestone floor might be nice. Or you can do wood or laminate. You could go with dark or light. I think it's mostly about preference....See MoreThe HouzzAU Queenslander club
Comments (2)I LOVE OLD QUEENSLANDERS.....emphasis on O L D! What a sight, a tall Queenslander...having come into being because of the heat in this State and therefore on tall and not so tall piers...I LOVE these houses but with one exception...and probably because in those days ther were no such things as... LIFTS! Nobody thought of the older Queenslander human whose hips and knees are worn out from hard work on the land..or for the little kids and toddlers.....STAIRS, STAIRS and more STAIRS! Beautiful gracious staircases....but.... Recently a young enthusiastic couple built a magnificent looking replica old Queenslander right across from my place. I watched it go up...and so did the rest of the neighbourhood...well, not criticising the modern builder but I'd rather have a genuine old Queenslander put together with hammer and iron nails! STAIRS seemed to have been made into a feature. The land overlooks a waterway that is prone to flooding so the piers had to be quite high....and that meant more treads! I think that maybe the builders were unaware of the need for a landing every...is it eight? steps? The back steps are straight up the rear of the house...no landings....OOOFFF going to welcome your new neighbiurs! I would not build a replica Queenslander but if I couldn't help myself I'd install A LIFT and I would invent a feature for going up and down .for the children...and I'd get my inspiration from some of the great Theme Parks that have to comply to strict safety standards.....Then and only then would I build a replica Old Queenslander...But I'd prefer A REAL ONE! .It has been my experience that replicas do not have the strength of the enormous oldies. For example: Show me a replica Queenslander with iron cyclone bolts securing the floor of the house to the piers. Show me a replica Queenslander where every VJ board in the walls and ceilings is held to the next with hidden nails? Show me one where the framework is all tongue and groove each piece locked into the other.....that cannot be achieved anymore because timbers are not seasoned for between 30-50 years and such building methods would weaken the structural timbers used today...so said the builder who added a veranda to my old place. He took photographs of the joinery! I LOVE OLD QUEENSLANDERS...But I'd only buy a really old one and renovate it using old methods and as much old timber as possible...and I'd add a LIFT and a kids "upper and downer" if the steps were to be high. One thing above all would deter me from building one from scratch....the unavailability and the expense of genuinely old timber...if it could be sourced.. A replica would never match the longevity and the methods of construction of the old ones. Those times are gone! Those homes can never be repeated...only replicated and its not the same by any bash of the nail. You can't buy those nails anymore and its impossible to hire a crew as large as a swarm of ants to build an old Queenslander from scratch. We just do not build like that these days. Meaning no disrespect to the skilled modern day builder who does marvellous things for the modern day.....its impossible to build a genuine old Queenslander for many reasons. LOVE and ADMIRE and CHERISH the old Queenslander, BUY ONE if you can and restore it as genuinely as possible. We'll never see its like again from any perspective....See MorePls help, mosaic doesn't match with wall tiles, how can I salvage this
Comments (13)Hi Rubypumps. Unfortunately you have made the common mistake of mixing undertones. I see this a lot as a colour consultant. Mistakes with your hard finishes are the worst kind because they are very costly to change. Right now your walls have a pink undertone and your walls behind the tub and counter are clearly blue grey. Since blue is complementary to pink, it brings out the pink in the tile even more and the clean blue makes the tile look dirty. It may be hard for you to see this, but this is what's happening and this is probably why you don't like your bathroom. Since you chose such a busy mosaic, it has become the boss (and focal point) of the room and I would now keep your other finishes as simple as possible. If you can, down the road, change the beige tile. Because unfortunately, there is no magic colour combination that will make it disappear. Working with what you have, I would most likely go with a more neutral cabinet like Uniboard G21 Viva Walnut. It will help warm up the space. Black is too stark for this bathroom....See MoreClueless on rug color! Help me find my perfect rug!
Comments (27)You already have your accent colour as your sofa pillows (log roll pillows). I would take one of them shopping with me to get a rug that has that colour in it. It doesn't need to be a lot of that colour (I love the idea of burgandy rug here...but it might be too much with your monotone scheme). You can find a large rug that incorporates that red/raspberry in it so that you have a colour that is now your accent....See MoreRoo
6 years ago
PROTraditional Sash Windows
6 years agolast modified: 6 years agoHi Roo
This floor can still be restored. Lithofin have a range of chemicals to remove adhesives, cement etc. They have an excellent technical dept should you wish to make an enquiry.
I just restored a similar floor for a friend over the weekend.
Regards
Graham
- PRO
Traditional Sash Windows
6 years ago
Sponsored
Bath Bespoke