Sand & Finish
Fine Floorz
6 years ago
Featured Answer
Sort by:Oldest
Comments (6)
Related Discussions
DIY white washing help
Comments (8)If the wood is raw, that would mean it has no stain, paint or sealer on it, in which case you would only need to sand the two years worth of use it has. If all dirt, grease, etc isn't off the piece before you whitewash it, this will show in the new finish. Sand it well, don't miss any areas, don't take any shortcuts. Then get some white stain, follow the instructions on the can, and finish with several coats of polyurethane. I find I get the very best results by using Minwax products....See MoreFloor skirting,
Comments (6)its easy to paint. you should sand the wood lightly other wise the paint wont stick. i'd use semi gloss to make it easy to dust/vacuum/wash....See MoreArt wall coffee table
Comments (3)Beautiful art wall and table! I'd suggest a medium honey-colored stain. Given the likely heavy usage, the table top is one of the few places I'd suggest a polyurethane finish. Legs can be finished with e.g. tung oil as it is very easy to use and should be OK in the lower use area....See MoreStaining Ceiling/Doorframes/Windowframes Darker
Comments (1)To do it right, the finish will need to be removed, the color changed, and then the finish put on. Cost wise, I suspect you would be better off replacing all the wood rather than refinishing all the wood. Varnish is a painted on finish that will scrape off if a door is kicked or where wood is touched a lot. I suggest you embrace the home, it's really beautiful....See More
Sponsored
Pearl Remodeling