Can I mount this to the wall with he 8" side against the wall and the"

Donna Babitsky

5 years ago

I want to use thes bracket on an 8" shelf.

Decorative Shelf Bracket, Flower Leaf, Distressed Blue Cast Iron, 9.375" · More Info

Sort by:Oldest

Comments (3)

PRO
TGL Direct
5 years ago
Yes, this bracket will mount either way
Jenn Young
last year
Hello there! I would like to use these brackets to support two 42" by 19" wood/resin coated shelves. The top shelf will include a stone sink. 1) Will the brackets support this weight? I think so but want to ask. 2) I am thinking three brackets for each shelf mounted in studs with 9.375" under shelf. These would match perfectly but they have to match the function as well. If you would please advise it would be most appreciated. Thank you very much and have a very nice day.
Related Discussions
folding doors( glass and timber) to divide living area
Q
Comments (10)
I'm assuming since he's recommended 5 panels, they will all be stacking to one side? If you were to have each side stack, then an even number would make sense. If they are stacking to one side, then five is better, as it is an odd number (better visually) and one less panel to stack back. You might want to tell us more about where these doors are going and perhaps even send us some pictures. If we can see what you are addressing we would be able to give you an answer that goes beyond conjecture.
...See More
Need help to determine where to place my inbuilt oven
Q
Comments (14)
Hi Fred, Thanks for the want of the precise measurements. The U shape area in my kitchen is 64" - 104 - 99" (left - centre - right). Height of the kitchen area is 107". The wall with the fridge has total length of 99" Fridge is 32" wide, 29" deep, 73" high (I bought this fridge on a good bargain but realized it was slightly oversized in this kitchen area, but got to live with it now) The wall beside the fridge is 23" deep I know some gap has to be left between this wall, the fridge and the wall mounted/countertop cabinets for ventilation I guess. So I'd say the cabinets on this wall will have a length of only 63"/64"? The microwave is 18.5 wide, 13" deep, 10.5" high The oven is 24" wide, 24" deep, 24" high. The wall next to the fridge which will have this feature cabinet 42" wide, 110" high which is next to the main door. I'm thinking the feature wall is kind of plain, but it covers up where the fridge is sticking out.
...See More
How does this work? Making wall collages look good.
Q
Comments (20)
work out the wall space you want to cover, measure this on the floor. then start laying out our design within the space on the floor to create your design. There has to be lines running through the collage so there is a method to the madness- we don't want a messy looking arrangement, there must be a flow. You can line up the matts with outside edge of other frames etc. Layout all of your pics on the floor and mix up the frame styles and sizes amongst your layout. Take photos of your layout and then start hanging. My tip is don't start hanging until you have your plan 100% !!! lots of neck stretches too! i recently put together this collage and need a neck massage afterwards ;-)
...See More
Cement 'growing' in bathroom floor, help!
Q
Comments (7)
It looks as if you have something crumbling behind the tiles. It could be the porcelain or the wall. This once happened to me. I paid for a professional to insert a gas fire into the fire breast. Consistently we had what looked like rubble falling down the chimney. No one knew what it was and we were baffled. Then one day we had the chimney swept by an amazing chimney sweep who informed us the wall prep behind the fireplace hadn't been done properly and what was falling down was the brick and rubble which was behind and had not been cleared properly. He said it wasn't a big deal and not dangerous so we left it, although it was an inconvenience having to clean it up every day particularly in bad weather. I would advise asking a tiler to come and have a look. Maybe your bathroom tiles need sealing, maybe water is getting in. If the tiler doesn't know ask a surveyor, he may not have the answer but he will know which trade to point you in the direction of. It could simply be a case of the walls not being prepped properly before the tiles were put up. Any which way, if a large tile which could potentially fall off a wall it needs to be checked because if it landed on you it could do serious damage or cause further tile damage which would make the job of rectifying more expensive.
...See More
PRO
TGL Direct
last year
These are a heavy duty bracket but we do not have any weight ratings for them...You would have to use your own judgement...Thanks

Can I mount this to the wall with he 8" side against the wall and the"

Comments (3)

TGL Direct

Jenn Young

Related Discussions

TGL Direct

COMPANY

EXPLORE HOUZZ

CONNECT WITH US