Stain color?

aclotm89

last year

Hi! Do you happen to remember the stain color used on the beams or tongue and groove?

Latorre · More Info

Sort by:Oldest

Comments (2)

PRO
Oakbridge Timberframing
last year
Thanks for asking! Natural clear on white oak beams, Natural clearcoat on Pine T&G.
aclotm89
Original Author
last year
Looks awesome. Thank you!
Related Discussions
LOST - color and look match
Q
Comments (14)
I also have an overwhelming need to see something curvy, flirtatious and round in the space. Consider this when scouting for decor and accesory items (i.e. round rug, curvy fluid light fixtures). Also, would it be a complete abomination to sand down the furniture (so it looks older) or painting it a new color before upholstering to modernize it? I agree with j222b's suggestion in that the furniture and space could benefit from some eclectic coverings but perhaps a neutral fabric against a new color that could bring out the carving of the wood could work too? In my head I see a rusty orange or deep aubergine purple or rich dark green. Just a thought...
...See More
DIY white washing help
Q
Comments (8)
If the wood is raw, that would mean it has no stain, paint or sealer on it, in which case you would only need to sand the two years worth of use it has. If all dirt, grease, etc isn't off the piece before you whitewash it, this will show in the new finish. Sand it well, don't miss any areas, don't take any shortcuts. Then get some white stain, follow the instructions on the can, and finish with several coats of polyurethane. I find I get the very best results by using Minwax products.
...See More
New black tiles with stain / Grout haze
Q
Comments (7)
Hi Thrishna, looks like you've put quite a lot of effort cleaning it already. Have you already tried the following: • Oxygenated bleach • Warm water • Coarse scrubbing brush (like an old toothbrush) • Towel • Lemon • Grout sealer TIP: Cleaning coloured grout should be done with special care. Bleaching agents (like chlorine bleach) can discolour and harm the coloured grout. Fortunately, oxygenated bleach does not contain corrosive chemicals and is safe to use on all grout. For those impossible-to-remove stains, you might want to consider: A commercial tile and grout cleaner A coarser brush (avoid using metal bristles, though, as they can erode the grout) Grout stain-proof If after you’ve tried all three, the stain is still hanging strong, you may have to resort to removing the old grout and replacing it with new. I got the above tips from our article "Household Headaches: How to Clean Tile Grout" here: https://www.houzz.com.sg/magazine/household-headaches-how-to-clean-tile-grout-stsetivw-vs~33806355 It's quite an extensive guide, so you might want start out with the lightest options?
...See More
Pros and Cons of Quartz Countertops!
Q
Comments (1)
Stone Amperor Pte Ltd 2. HEAT-RESISTANT (~204 DEGREES CELSIUS) of quartz Just to clarify the following points with quartz any temperature over 80oC will cause microfissuring. Failure usually occurs at between 95oC and 125oC . Like any stone or surface, if you can not touch the heated object with your naked hand... DO NOT PUT IT ON the surface.
...See More

Stain color?

Comments (2)

Oakbridge Timberframing

aclotm89
Original Author

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US

Stain color?

Comments (2)

Oakbridge Timberframing

aclotm89Original Author

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US

aclotm89
Original Author