Pull out on casters?

Tammy Bee

5 years ago

Love to replicate this seamless look. is the pull out on hidden casters? Could you provide any info on them?

Cranmore · More Info

Sort by:Oldest

Comment (1)

PRO
Mari Kushino Design
5 years ago
Hi there, The pull out is on casters yes. We had to make sure that they weren't too big so that it didn't roll around too much. Hope this helps!
Related Discussions
Tiny kitchen in a studio apartment
Q
Comments (6)
Boy, it sure looks like the refrigerator doors open on the wrong side--can you get the developer to swap it out or change the door swing?--must be a mistake. I would find that really annoying, especially in such a small workspace. I really see a movable island parallel to the cabinets in this space with storage underneath and maybe a hanging pot rack with lights and maybe some shelving above, possibly with some stools for casual dining. Do you have room for something like that? A freestanding stainless metal full- or counter-height shelf on casters adjacent to the sink could be really helpful. You could put some simple white dishpans or bins on it as a temporary holding place for dirty dishes while you are cooking, and use the rest for overflow for big pots or pantry items. The L counter with the curved sink might be a little awkward, but sure beats not having some usable counter space. If that is all you are adding, then perhaps a cart with a shelf that flips up for extra prep or dining space would work for you. I would pay the money to get decent lighting. I think I see a thin range hood over the cooktop. If this is European, there should be wiring and a plug for the range hood, so I wouldn't think it would be too expensive to run some wire for lights Doesn't the range hood already have lights. BTW?
...See More
How does this work? Making wall collages look good.
Q
Comments (20)
work out the wall space you want to cover, measure this on the floor. then start laying out our design within the space on the floor to create your design. There has to be lines running through the collage so there is a method to the madness- we don't want a messy looking arrangement, there must be a flow. You can line up the matts with outside edge of other frames etc. Layout all of your pics on the floor and mix up the frame styles and sizes amongst your layout. Take photos of your layout and then start hanging. My tip is don't start hanging until you have your plan 100% !!! lots of neck stretches too! i recently put together this collage and need a neck massage afterwards ;-)
...See More
Is renovation more stress than it is worth?
Q
Comments (4)
Well, I've been renovating this house for now on 12 years on and off, and the stress at times can be real tough. Most of it is due to the person who is helping me renovate. Their lack of communication skills and doing what they think I want rather than sticking to the budget and/or plan is a bone of contention. So, I think it can be a stressful situation but not if you clearly have someone working with you not against you all the time! (The person has Asperger's and it's really hard to keep him on task and not tangent off....sigh.....getting there though!) Ask ask and ask around, check reviews online, ask to look at their work of the tradies, if you are going to use them. Plumbers, plasterers will often give you a reduced rate if you do some of the leg work yourself, like prep walls, or get all the pipes etc together. Have a clear understanding where you are going and have a time frame and try to stick to it. DO NOT start renos in late summer when the weather is still good, the weeks run away real fast and soon it is dark and changeable and the project not finished!
...See More
3D Metallic Epoxy Resin Floor
Q
Comments (22)
Hi everyone, My basement got some water after the recent storms in our area. We had vinyl planks flooring and had to pull all of it out, damaging most of it in the process. We are certainly not looking into putting flooring down again, and we are considering epoxy flooring. I want to ask here your opinions, experience, and pros and cons of polished concrete floors Atlanta. Ideally, we would prefer to do it ourselves as the cost to hire out appears to be astronomical. We saw a company called Everlast Epoxy and wonder if anyone here knows about them and their product. Thank you for sharing your thoughts and opinions.
...See More

Pull out on casters?

Comment (1)

Mari Kushino Design

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US