skip to main content

How did you install the recessed lighting?

4 years ago

Did you have to go through the roof?

Joan Brown's Eichler · More Info

Sort by:Oldest

Comment (1)

PRO
Yama Architecture
4 years ago
yes, typically w Eichler homes, the exposed T&G 2x wood ceilings require low profile IC recessed cans installed from above, new plywood boxes are built over the housings, then a new foam roof is sprayed down. The light trims need to be able to navigate the extra thickness of T&G + new 1/2" plywood sheathing- so 2" of travel for the trim ring.. that's the tougher part!
Related Discussions
Ambient lighting : options and guidelines
Q
Comments (4)
You mean general lighting? Ambient light is whatever lighting happens to be spilling into the space. Could even be from outdoors or another room. Lighting is generally divided into general, task and accent lighting. General usually being overhead and providing a base level of illumination. Task being things like lamps, vanity lights or pendants-anything helping u see better. And accent being anything used to accent or emphasize something. Sometimes the categories run together like under cabinet lights which are both task and accent. So in order to figure out what the right fixture or lamp is you have to determine is it for general, accent or task purposes. Fluorescent tubes make great general light in an office or workspace but poor task or accent light in a family room. Similarly lots of recessed lights work well in kitchens but are usually too much in bedrooms where you typically don't need much general lighting. A good vanity fixture might fulfill all three in a powder room but in a master bathroom you might need some recessed cans to provide task lighting over the shower or tub. A lamp might be enough in a bedroom but not enough for a heavy task area like a laundry room. You get the idea. It's less about the fixture and more about how it's being used.
...See More
Tiny kitchen in a studio apartment
Q
Comments (6)
Boy, it sure looks like the refrigerator doors open on the wrong side--can you get the developer to swap it out or change the door swing?--must be a mistake. I would find that really annoying, especially in such a small workspace. I really see a movable island parallel to the cabinets in this space with storage underneath and maybe a hanging pot rack with lights and maybe some shelving above, possibly with some stools for casual dining. Do you have room for something like that? A freestanding stainless metal full- or counter-height shelf on casters adjacent to the sink could be really helpful. You could put some simple white dishpans or bins on it as a temporary holding place for dirty dishes while you are cooking, and use the rest for overflow for big pots or pantry items. The L counter with the curved sink might be a little awkward, but sure beats not having some usable counter space. If that is all you are adding, then perhaps a cart with a shelf that flips up for extra prep or dining space would work for you. I would pay the money to get decent lighting. I think I see a thin range hood over the cooktop. If this is European, there should be wiring and a plug for the range hood, so I wouldn't think it would be too expensive to run some wire for lights Doesn't the range hood already have lights. BTW?
...See More
Avanti Review - UNILUX Group Lighting the Way
Q
Comments (0)
Avanti Review - UNILUX Group Lighting the Way to a One World UNILUX has always been in the innovation boiler technology business for years. It debuted in 1979 when it developed and introduced an innovative bent water-tube boiler design for commercial, institutional and industrial heating/process applications. UNILUX boilers are used today for hot water, high-pressure steam, low-pressure steam, high-temperature hot water, waste heat, thermal fluid and, recently, industrial modular applications. Incorporated in 1973, UNILUX started in business with the manufacture of vertical fan coils. Its original plant was located in Toronto, Canada. The UNILUX steel bent water-tube boiler design was patented in 1981. It is the second oldest bent-tube boiler available on the market today. In 2000, UNILUX became an American owned company. By 2004, corporate expansion increased manufacturing capacity in the new US plant. Today, UNILUX operates in a 67,000-square-foot, state-of-the-art facility in Schenectady, New York State. Our Boilers UNILUX -- the brand is the product, as well -- is the world’s original 5-pass, forced-draft, bent-tube boiler. With over three decades of manufacturing and operational track record in almost all industries requiring boilers, UNILUX stands alone as the excellent, highly-engineered, highest-quality boiler in its class. However, our success does not depend only on the products that can speak for themselves but on our hardworking, professional people, many of whom have served for over 25 years at UNILUX. Every unit that comes out of our production line is a labor of love we can be proud of. Utmost in every worker’s mind at UNILUX is customer satisfaction, from prompt response to inquiries, performance data, drawings, product description, assistance with proper selection and final delivery and installation of the unit. Moreover, UNILUX’s Quality-Assurance/Quality-Control program provides a no-nonsense, stringent internal process that encourages our employee’s commitment to safety, product quality and excellent performance. How to get in touch with us If you have any concerns or problems regarding boiler needs, please contact us at the following addresses or numbers: Advanced Manufacturing, LLC 30 Commerce Park Dr Schenectady, NY 12309 Ph. 518.344.7490 Fx. 518.344.7495 info@UNILUXam.com UNILUX Boiler Corporation 140 Hanlan Rd Woodbridge, ON L4L 3P6
...See More
Need help designing my corridor
Q
Comments (9)
Hi razis_wwf13, here are two articles on Houzz to get you started with. Although they are international, some ideas are applicable to the HDB context. My favourite is to use the corridor as an artwork gallery with some proper lighting :) [10 Clever Tips to Better Use Corridors[(https://www.houzz.com.sg/magazine/10-clever-tips-to-better-use-corridors-stsetivw-vs~77897314) [Create a Welcoming Hallway When you Don't Have one[(https://www.houzz.com.sg/magazine/create-a-welcoming-hallway-when-you-dont-have-one-stsetivw-vs~81092193)
...See More

Sponsored

More Discussions

How to position a TV in this living / dining room?

0

Hi, how to plain for the kitchen

1

Singapore

Tailor my experience with cookies

Houzz uses cookies and similar technologies to personalise my experience, serve me relevant content, and improve Houzz products and services. By clicking ‘Accept’ I agree to this, as further described in the Houzz Cookie Policy. I can reject non-essential cookies by clicking ‘Manage Preferences’.