what is the make and model of the appliance pull handle on the cabinet

isabell_petzelt47

3 years ago

what is the make and model of the appliance pull handle on the cabinets? Looks beautiful!!!

Minimalist · More Info

Sort by:Oldest

Comment (1)

PRO
RAO Design Studio, Inc.
3 years ago
Isabell, thank you for the shout out and nice words. The pulls and cabinets are from SieMatic. One interesting detail about the pull is that is it solid stock metal material that is milled and then finished. A very nice detail. If you wish to find out about purchasing pulls, please email me or call my office and I can help.
Related Discussions
Ideas on updating/replacing the veneer trim under kitchen cabinets
Q
Comments (12)
I would seriously consider replacing the cabinets before putting a new granite countertop on them. The problem is that no one will remove the countertop at a later date if you want to change the cabinets, due to the possibility of breakage. The only choice you will have then is a reface. Adding new doors, drawer fronts, and veneered sides is just a facelift. You could also add new hardwood drawers with undermount cushion close slides, but by the time you do this if will be the same cost as new cabinets now. The cabinets you have now, frameless, particle board sides are notorious for having the hinge screws strip out the particle board they are attached to. Since you can't put a longer screw in them, because the material is only 3/4" of an inch thick you have a problem. You also can't put a wider screw in them because it won't fit through the pre-drilled holes in the hinges.
...See More
Awkward Blind Corner in Kitchen--Cabinet Solution?
Q
Comments (16)
Thanks, lefty47. This is an older home, and just as One Plan guessed it is a soil stack from the upstairs bathroom. You are probably right that the cost of a custom solution may outweigh the benefits. Another idea I had, along the lines of the worktop bin suggested by One Plan, is a recessed spatula and long-handled utensil holder. I found out that Lee Valley sells motorized tv lift kits like the one used in the video above. It would be a matter of getting the contractor to build the box to go on the lift. I'm still a bit hung up on the idea, though it probably falls into your cost-outweighs-benefit category! I may bring this photo around with me when interviewing prospective contractors, just to see how they answer!
...See More
Clueless on rug color! Help me find my perfect rug!
Q
Comments (27)
You already have your accent colour as your sofa pillows (log roll pillows). I would take one of them shopping with me to get a rug that has that colour in it. It doesn't need to be a lot of that colour (I love the idea of burgandy rug here...but it might be too much with your monotone scheme). You can find a large rug that incorporates that red/raspberry in it so that you have a colour that is now your accent.
...See More
suggestions needed for broken U kitchen
Q
Comments (1)
If u have the budget, I would suggest moving the store to the back and have the room next to the toilet, and even making it ensuite so that it is more suitable for elderly/guest use. Having the store at the back of the house will enlarge your storage for food items and even possibility of placing the fridge inside the store. The distance between the two walls is too great to form a good working triangle. I would suggest a n-shape kitchen instead. Cut short the current L-shape and make it into n-shape. U can even have a bar counter adjoining the kitchen counter with the space saved. U can then place the fridge and the pullout pantry in the middle, the hob near to the rear of the house and the sink facing the dining. For more countertop space, consider a flip up table from the kitchen cabinet next to the door accessing the laundry.
...See More

what is the make and model of the appliance pull handle on the cabinet

Comment (1)

RAO Design Studio, Inc.

Related Discussions

COMPANY

EXPLORE HOUZZ

CONNECT WITH US